Find the best Valspar Spray Paint here:
Refresh your BBQ
If your barbecue is rusted or discolored, you don't need to go out and spend money on a new one. It's quick and easy to refurbish your existing barbecue with Valspar High Heat - just remember not to leave it out over the winter again next year!
Print this ideaBarbecue
Wire brush
Newspaper
Masking tape
"Valspar High Heat cannot be used on the cooking surface of your barbecue."
.jpg)
Remove any ash from the body of the barbecue and dismantle. Wash all the parts in hot, soapy water, and dry carefully.
Rub the barbecue thoroughly with a soft wire brush to key the surface and remove any rust.
Shield any areas you don't want to paint (like the interior of the bowl, any vent slides or handles) with newspaper and masking tape.
Apply several light, even coats of Valspar High Heat paint.
Note: Always follow usage instructions on the reverse of Valspar spray paint cans.
Silver Fridge
White appliances can look stark, cold and out of place in...
.jpg)
Christmas Table Setting
Why not add a little sparkle into your home this holiday...
.jpg)