Refresh your BBQ.

If your barbecue is rusted or discolored, you don't need to go out and spend money on a new one. It's quick and easy to refurbish your existing barbecue with Valspar High Heat - just remember not to leave it out over the winter again next year!

 

You'll need

Barbecue
Wire brush
Newspaper
Masking tape

High Heat

Hints & tips

"Valspar High Heat cannot be used on the cooking surface of your barbecue."

You can spray a BBQ with spray paint
Why not try these products?
ADHESIVE SPRAY HEAVY DUTY - For UK only  
 
Step by step guide
Step Number1
BBQ Before

Remove any ash from the body of the barbecue and dismantle. Wash all the parts in hot, soapy water, and dry carefully.

 
Step Number2
BBQ step 1

Rub the barbecue thoroughly with a soft wire brush to key the surface and remove any rust.

 
Step Number3

Shield any areas you don't want to paint (like the interior of the bowl, any vent slides or handles) with newspaper and masking tape.

 
Step Number4
BBQ step 2

Apply several light, even coats of Valspar High Heat paint.

 
Step Number5

Note: Always follow usage instructions on the reverse of Valspar spray paint cans.